Wednesday, February 27, 2008

Dis-assembly (Cont)

With the Roomba upside
down, remove the 10
screws that hold the
front bumper retainer
plate and lift it off and
away. Then lift the front
bumper away from the
robot. Be careful not
to damage the ribbon
cable that plugs into
the Circuit Board.

With the Roomba sitting
flat,remove all the screws
on the top panel except
the two screws holding
the Roomba handle.
Begin lifting top away
from the bottom base
of the robot. Lift evenly
on all sides to free the
top off of the base.

No comments: